1784-KTX Replacements: DL3500-DH+/DF1 and DL7000-ETH/DH+
DataLink Technologies is pleased to announce some flexible, external options to the Legacy Gateway products replacing the 1770-KF2, 1784-KTX, 1784-KTX, 1784-PCMK, and 1784-U2DHP.
Our DL3500-DH+/DF1 is a serial/USB Interface to DH+ and our DL7000-ETH/DH+ is an Ethernet to DH+ option allowing for remote RSLINX/LOGIX programming. With PCI architectures continually changing, the DataLink solutions provide external options that allow legacy DH+ devices to connect both serial/USB and remotely to Ethernet.
Call Toll Free (866) 709-6390.
DL3500-DH+/DF1: $1,395USD List
USB/Serial Interface to DH+
The DL3500-DH+/DF1 is a USB/serial, compact alternative to Allen-Bradley's 1770-KF2. Also provides the same functionality as the 1784-KTX, 1784-KTX, 1784-PCMK, 1784-U2DHP or SST 5136-SD. The DataLink converts A-B DF1, (Modbus & ASCII also available) serial protocol to A-B DH+ network protocol providing a serial interface to DH+ for computers, modems and OEM equipment. Applications include PLC programming and graphical user interfaces (GUIs and MMIs) such as RSLINX, RSLOGIX, Wonderware, Kepare, Intellution, Citect, etc.
DL7000-ETH/DH+: $1,495 List
Ethernet/IP and AB Ethernet Interface to DH+
The DL7000 is a gateway that interfaces any Newer AB Ethernet/IP & AB Ethernet PLCs or MMI/SCADA/Programming package to any device/node on AB’s DH+.This gateway is a cost-effective alternative to the AB Controllogix Gateway (1756-ENBT and 1756-RIO) and provides another programming option to the 1784-KTX, 1784-KTX, 1784-PCMK, 1784-U2DHP or SST 5136-SD Applications include:
- Multiple SCADA/MMI/Programming Workstations (RLSINX/LOGIX/VIEW,Wondware, Kepware, Citect, Intellution IFIX, et. all) packages using AB Ethernet Drivers can read/write data from/to multiple DH+ nodes.
- Any AB Ethernet & Ethernet/IP PLC (MicroLogix, SLC 5/05, CompactLogix, FlexLogix, PLC-5E, ControlLogix) will be able to send either read or write MSG (message) instructions to any DH+ PLC (SLC 5/04, PLC-5).
The 1784-KTX and -KTXD cards:
•communicate with nodes on Data Highway Plus networks, including PLC-5®, PLC-5/250, and SLC 5/04 processors, and SLC 5/01, SLC 5/02, and SLC5/03 processors (only via 1785-KA5)
•communicate with SLC processors on DH-485 networks
•communicate to DH+ and Remote I/O via SoftLogix-5
•communicate to ControlLogix through a 1756-DHRIO module
•act as a remote I/O scanner
The 1784-KTX performs data transmission, management, and local network diagnostics. The interface to the host processor is through a board-resident dual-port memory.
Rockwell Automation RSLinx interface software manages data transmission and reception through dual-port memory.
The PCI BIOS on your computer automatically assigns the KTX card.s IRQ and base memory address (one for each channel). If your card has two channels, both channels share.
The 1784-KTX card is a PCI bus card, compliant with the PCI Bus Specification Revision 2.3. This card was developed with Plug and Play functionality, as defined in Revision 1.0A of the Plug and Play BIOS Specification. Because of this, KTX cards do not require the use of switches or jumpers to configure their specific interrupt request levels (IRQ) and base memory address values. These configurations are automatically assigned to the KTX card by the PCI BIOS when the computer is powered-up. The configurations are stored in the PCI configuration registers.
Buy 1784 replacements with us.
Call Toll Free (866) 709-6390.
DataLink’s more cost efficient and reliable solutions include replacements to 1770-KF2, 1770-KF3,1784-KTX, 1784-KTX, 1784-PCMK products. We have many customizable DH+ & DH-485 solutions for all types of AB PLC applications. Replacements to SST 5136-SD.
1784-KTX Background information
Rockwell Automation 1784-KTX family PCI cards connect PCs to PLC controllers on Data Highway Plus (DH+) or SLC processors on DH-485 networks for easy programming and data acquisition. I/O scanner functionality is also available in the cards so they can be used with soft-control or embedded-control engines. And, because these cards incorporate the Universal PCI Card Standard, they are compatible with almost any PC. If general programming, configuration, and monitoring capabilities via an industrial or desktop PC are required, these cards are a necessity.
Your 1784-KTX network interface card (cat. nos. 1784-KTX and 1784-KTXD) is a PCI (Peripheral Component Interconnect) universal card that must be inserted into a PCI bus slot. A universal card can be placed into a PCI bus slot that is keyed for either 3.3 Volt or 5 Volt signalling. This card may also be placed in a 64-bit slot, although it will not use the extended 64-bit operation. Table 1.1 outlines features supported by the KTX cards. Listen to our users. The DL3500-DH+/DF1 works exactly as they say. It is simple to configure and got my applications connected quickly and it was a very cost-effective solution.
AB 1784 Tags:
1784 ktx, 1784 ktx card, 1784 ktx driver,
allen bradley 1784 ktx,
1784 pktx a,
1784 pktx b,
1784 pktx drivers,
1784 pktx card
1784 pktx,
1784 pktx driver,
ab 1784 pktx,
1784 pktx manual,
pktx card,
1784 pktxd
Related Products
Allen-Bradley 1784 pcmk, 1784 pktx, 1784 ktx, 1770-kf3, bradley 1770-kf2
Contact Us:
3888 Sound Way
Bellingham WA USA
98226
Toll Free (866) 709-6390
Tel: (360) 306-5878
Fax: (604) 608-9504
info@datalinkgateways.com
|
Order Today! |
| |
 |
|
| |
Call or email for any technical support issues or pricing inquiries
Toll free (866) 709-6390
or
(604) 632-4278
(9:00am EST) |
|
| |
|
|
|
Our Guarantee |
| |
Satisfaction Guaranteed.
Your complete satisfaction with all our products is essential.
We offer a 30-day money-back guarantee and a one-year warranty on parts and service. |
|
|
|
Order your 1784-KTX Replacement (from $1395USD List)- Toll free (866) 709-6390
